Wednesday, February 16, 2011

photoShop large collection of basic production skills

 First, how to make a vignetting effect?
How to create a vignetting effect?
Vignetting (Vignettss) effect is the gradient of an image with soft edges effect. Vignetting effects using Photoshop is very easy to make, the following describes how to use Photoshop5 .5 produce vignetting effect of the two images.
1. Ellipse vignetting effect
1) Open a picture using Photoshop5.5;
2) in the toolbar, select the ellipse lasso tool; < br> 3) with the elliptical lasso tool to select the desired image part;
4) the implementation of the Feather command under the Select menu, set the Feather value of 40 pixels;
5) the implementation of the Inverse command under the Select menu or press Ctrl + Shift + I key combination to reverse the selected area;
6) set the background color, such as white.
7) press the Del key to select the area with the background color, vignetting effect of the formation.
2. vignetting effect in any shape
1) Open an image;
2) press the q key to switch to Quick Mask mode;
3) Select the brush in the toolbox, and choose a size appropriate brush;
4) using the brush in the image painted;
5) press q to switch to standard mode, when the area was not painted a selected area;
6) Press Shift + Ctrl + I key combination to reverse the constituency;
7) the implementation of the Feather command under the Select menu, set the Feather value of 10 pixels;
8) set the background color;
9) press the Del key with the background color Fill selected area, vignetting effect of the formation.
Summary: vignetting effect is mainly used constituency Feather (Feather) characteristics of the formation. Feather greater the vignetting effect is more obvious. vignetting effect of arbitrary shape, the first by rapid irregular mask to create a constituency, and then invert the selection, emergence, fill, you can. the key is the selection of constituency (painted) and set the Feather value.
Note: In Quick Mask mode , the use of brushes, erasers, pencils, airbrush and other tools applied in the image, no matter what the current foreground color, apply the mask area regions in red (the color of quick mask can be set.) switch back to standard mode, has not been applied to the formation of regional constituencies.
Second, how to make hand in hand what is the word the word
? hand the word generally refers to the text interspersed with each other to form inter-related effects. it is a expression, commonly used in English and the art of digital effects design. hand words interspersed with each other, inter-related effects
how formed? Here's how to make use of Photoshop5.5 hand word.
1 .
10cmt6cm of a new RGB file size, and filled with a red background.
2.
Select the text tool in the toolbox, the new image, enter the number Select Faux
Italic items, set the font to YouYuan (Young Circle), the size of 200points, color is blue.
3.
input using the same methods were three as blue, green, yellow. Each figure represents a layer.
4.
adjust the position relationship between the various layers, so that the individual numbers adjacent to each other. and at the same level.
5.
select the Type Layer menu item, the Executive Render command, all the text layer into a regular layer.
6.
choose Layer Effects menu item, the Executive Belev and
Emboss command, respectively, where each layer to add the number of lead angle and the relief effect. Down in the Effects dialog box, select the item, other items can be the default setting.
7.
in the Layers panel, hold down the Ctrl key, click 2 stacked at the drag to subtract the constituency there.
9.
and then switch to a there is overlap in the bottom two, below the overlap should be eliminated at the constituency and then delete it. Finally, as shown above can be obtained by How to make the shadow of the shadow of the word
word is the simplest and one of the most common text effects. the shadow of three-dimensional character with a significant effect on many occasions, the design need to use it. There will introduce how to use Photoshop5.5 to create two types of shadow characters, one is the shadow of the word projection, the other is the shadow of the word perspective.
one. projector shadow word
1.
Create a new RGB file size 12cmt6cm the background is white.
2.
Texture Select Filter menu item, the Executive Texturize filters. In the Texturizer dialog box, set the Texture: Sandstone, Scaling: 100%, Reliefe: 8.
3. Select the text tool, type in the new image implementation of Gaussian filters. on the shadow layer, Gaussian Blur, set Radius to 5pixels.
6. point to open the > 7. Use the Move tool to move the shadow to the appropriate location, so the text layer and the top of the stagger a little distance.
8. will merge layers to complete the production of the word shadow projection.
II. Perspective Shadow word
1. then the above step 6, select the Edit menu item Transform, Distort command execution, the shadow layer of distortion.
2. Drag the deformation, respectively, two small boxes at the top of the box, the shadow layer to adjust to the appropriate location. and then press the Enter key to confirm the deformation.
3. merge layers to complete the production of perspective shadow.
Summary: shadow word mainly used in the production of the basic functions of the layers. replication first layer as a shadow layer, then the fuzzy layer, and finally adjust the position of the layer can be achieved between the production of the shadow of the word.
Fourth, how to create cutting edge effects
will be two images together in Photoshop together and make some simple processing, you can get all kinds of fancy paper cutting effect. The following are examples.
1. Open the two images, one for the landscape, and the other one for the sculpture map. As before the two the image shown below. We will landscape the br> 3. in sculpture the figure, magic wand click in the blank, and then press Ctrl + Shit + I key combination anti-choice, select the entire sculpture.
4. Press Ctrl + C key combination to copy the sculpture constituencies Switch to the landscape, according to the key combination Ctrl + V to copy the image to sculpture in the new layer and adjust its position.
5. Press Ctrl key to click the new layer, create a sculpture shaped constituency, and close new layer.
6. and then switch to the background layer, double-click the background layer to convert it to an ordinary level.
7. You should ensure that the constituency is also, according to Ctrl + Shift + I key combination anti-choice.
8. constituencies by Del key to delete the image, the deleted part will become transparent, this time cutting edge effects already achieved.
9. Press Ctrl + D key combination to cancel the selection, then delete the sculpture image where the layer.
Summary: paper-cut edge effects of the layers used in the production of the main features, and constituency characteristics. in which the selection is the key constituency, constituency selected cutting edge will have a direct effect of the decision is good or bad.
Fifth, how to make reflection in Photoshop image
production process, especially for image synthesis, sometimes need to make the image reflection. production of reflection is very simple to use Photoshop, the following examples.
1. open two puppies images, shown above in front of two images. We put the dog in the second picture to add to a picture, let them be with. Because it is in the water, so to consider when making a second one dog reflection in the water produced.
2. to switch to the second picture, the use of magnetic lasso tool to select the puppy, and then press Ctrl + C key combination, the selection of the images copied to the clipboard.
3 . Switch to the first image, press Ctrl + V key combination to select the second image to the new dog layer. the new layer dog2.
4. Select the menu item ; Edit / Transform / Numeric . dog2 using mobile tools to adjust the position, so stand side by side and the first puppy waters.
6. will dog2 layer to the Layers panel, drag the dog2 layer. will be copied from the layer named reflection.
7. confirm the current level for the reflection layer, select the menu item . using mobile tools mobile flip the reflection layer, an image of it in dog2 location.
9. Select Filter 2pixels.
10.
reflection effect has been produced at this time is completed, merge layers.
Summary: reflection of the layers used in the production of the main features. reflection is in fact a copy of the original image, but taking into account mapping relations between them, so it was vertical flip. In addition, the reflection is usually more general than the original image blurring, so use the blur filter to blur it.
six, how to make artistic picture frame Art photos
usually need a pretty frame to provide a contrast to be a coordinated and elegant beauty. There will introduce the method of making an art frame.
1. Open an artistic license, such as the above first images shown. Press Ctrl + A key combination, select the entire map; and then press Ctrl + C key combination, the selection of the images copied to the clipboard.
2. File menu's New command execution Open a New dialog box. as the last step of the copy command, so the New dialog box, the image width and height is automatically set to copy the image width and height. will increase the width and height of 10%, respectively, where the width and height, respectively, and increases to 310pixels 440pixels.
3. is set up click the Ok button, and then will create a new file. Press Ctrl + V key combination, the characters on the image to the clipboard to the new layer Layer
1.
4. Open the Channels panel, click the New button on the bottom panel to create a Alpha 1 channel. At this time Alpha
1 for the current channel, the image was dark.
5. use of rectangular marquee in the Alpha
1 channel to select a rectangular area. rectangular selection of images to be copied than to be smaller, and in the middle of the image.
6. Press the Alt + Delete key combination, fill the selection with white . and then press Ctrl + D key combination to deselect.
7. Select effect.
8. Open the Layers panel, click the Layer
1 layer. Executive Select menu, Load Selection command, load the Alpha 1 channel.
9. Press Ctrl + Shift + I key combination for anti-selection, set the background color to yellow, according to Ctrl + Delete key combination to use the yellow background color fill.
10. Press Ctrl + D key combination to cancel the selection, use the Crop tool to cut off the edge of a part, and finally get a more satisfactory art frame.
Summary: The Art of the wave edge of the frame is produced using the Ripple filter. You may need to be adjusted according to the actual value of the size of the Amount to be satisfied with the wave edge. In addition there is also used Alpha
channel function. Alpha channel selection with edit and save functions, it actually used a lot in the process of image making.
seven, how to make a frame word is the word
border often used in the production of posters of a rice paper works kinds of special effects text. It uses the border and text in color contrast, to highlight text of special text effects.
1. using the New command under the File menu, create a 12t6cm the RGB image file.
2. image using the text tool, type in the new . Press Ctrl key in the Layers panel, click the text layer, into the target box (about the text selected).
5. In the toolbox, double-click the linear gradient tool, pop it in the options panel Linear Gradient
Options, select the Gradient gradient method for the Spectrum.
6. Use the gradient tool drag it from left to right in the image, the text color.
7. using the menu command expand the object frame 6 pixels.
8. Use the menu command Gradient selected as Copper, from top to bottom and then use the Gradient tool and drag to the border color.
10. Press Ctrl + D key combination to deselect, and then merge the layers to complete the production of the word border.
Summary: the main frame is the use of the word menu, Select Modify command, the text object frame to expand and set boundaries, and then use the gradient tool and get coloring.
eight, how to make burning the word?
effect diagram:
operation:
1.
with the File menu New command, or use the shortcut key > 2. using the text tool, type in the image 4. Select the Rotate
Cavas Image menu item, the Executive 90CW command, the image 90 degrees clockwise.
5.
choose Stylize Filter menu item, the Executive Wind (wind) filter. Method column item selected Wind, Direction From the
right column item. and then press Ctrl + F key combination, again using the Wind filter just used to enhance the wind effect.
6. re-use Rotate
Canvas Image menu in the 90CCW command to rotate the image 90 degrees counterclockwise.
7.
choose Distort Filter menu item, the Executive Ripple wave filter to the flame to flutter.
8 . Select the Image Mode menu item, the Executive Indexed
Color command converts the image to Indexed Color mode.
9. again choose Image Mode menu item, the Executive Color
Table command, open the Color Table dialogue box, in the Table list, select Black Body color table.
10. again choose Image Mode menu item, the Executive RGB
Color command, the image is converted to RGB mode. to complete the production of combustion of the word.
nine, how to make transparent the word?
effect diagram:
operation:
1. open a background image, then use the Text tool to enter the
move to the background of the central text, then hold down the Ctrl key click Layer (layer) panel of the text layer, select the text.
3. Executive Select (select) menu Save
Seletion ( Save constituency) command to open a dialog box, directly enter, the selection is saved as a new channel. In the absence of a channel name, the new channel will automatically be named Alpha 1.
4. Repeat the last step will then save selection to another channel Apha
2.
5.
press Ctrl + D key combination to deselect the text layer and then removed.
6. Open Channels (channels) panel, activate the Alpha
2 channels. At this point the image in bold white, white part is stored in the Alpha 2 channel selection.
7.
Select Filter (filter) Menu Other (other), the implementation of Offset (Displacement) filter microscopy. are the horizontal and vertical offset is set to 3 and 4.
8.
panel on the selected channel RGB channel, restore color channel.
9. Executive Select (select) menu Load < br> Seletion (marquee) command, into the Alpha 1 channel. In Operation (operation) bar, select New (new constituency) above.
10. using the same method into the Alpha
2 channel, but The Operation (operation) is selected in column Subtract from Selection (Subtract from Selection). This has been printed in the Alpha
1 constituency will be reduced by Alpha 2 constituency.
11.
select image (image) menu Adjust (adjust), the implementation of Brightness / Contrast (Brightness / Contrast) command, the Brightness (brightness) set to 100. the steps used to make transparent the brightness of protruding part of the word.
12. If Step into the constituency again, 9,10 that, but the first load Alpha
2 channel (Opertion item is New), and then into the Alpha 1 channel (Operation item to Subtract from Selection).
13. < br> If step 11 once again executive Brightness / Contrast (Brightness / Contrast) command, the Brightness (brightness) is set to -100, the word used to make transparent shaded.
14.
press Ctrl + D combination key to cancel the selection, complete the production of transparent words.
ten, how to restore the default settings
Photoshop Photoshop has given us great freedom, we can set a variety of tools options panel, you can drag and drop any , separation, combination of various panels. In addition, we can also set the Photoshop environment. But more change, Photoshop will become chaotic. At this time, we tend to restore Photoshop's default settings, how to do it? just can not re-install Photoshop it!
1. Recovery Tool Options panel settings
we use various tools in the toolbox, often according to the actual tool options panel to set the parameters. when we need to restore the tool selection entry panel to set the default settings, click the upper right corner of the tool options panel, the black triangle button to open a panel menu. select or select chaos, to restore the position of the control panel. is simple: In the ; Reset
Palette Locations to Default Friends like to set up their own Photoshop environment. In some cases, we need to restore the default environment settings Photoshop.
Photoshop5.5 environmental parameter settings stored in a file. To restore the default Photoshop settings, you can simply delete the file. The next start, Photoshop will be the default parameter to set the system environment, back to when you first start after installation of the state. exit when Photoshop It will then create a new 5.5 Adobe Photoshop 5.5 Settings folder.
Photoshop5.0 environmental parameters, make the file

No comments:

Post a Comment